Remote Rig
RRC 1258 Support in English => General discussion forum => Topic started by: IZ7ANL on 2011-08-24, 00:49:21
-
Any link is avalable on page ProSistel Rotor. Any body can help me to configure and a picture to connect RS232.
My best regard
Nick 73
-
check one of my previous post with schematics
Guy ON4AOI
-
I didn't find anythings in old post. May you help me?
73 Nicola
-
Hi Nick if you do a search for prositel and on4aoi you find it easy
here is the link
http://www.remoterig.com/forum/index.php?action=dlattach;topic=391.0;attach=107;image
Guy ON4AOI
-
Many thanks Guy. May you tell me about the setting, serial mode 3 or 5?
73 Nicola
-
Hi Nicola
Mode should be 3
baud rate = 9600
data bits=8
stop bits=1
parity=0
Rts/cts = Yes
in both boxes
Guy ON4AOI
-
Guy,
unfortunaly no play. I used Com1 inverted cable 2-3 but I didn't have succes. Tomorrow I will try Com2 straight cable.
With Daiwa rotor 4 motor Com1 all was ok.
73 Nicola