Remote Rig

RRC 1258 Support in English => Configuration, RRC 1258 => Topic started by: wb4uga on 2012-03-23, 20:41:40

Title: IC-706 CW not Keying
Post by: wb4uga on 2012-03-23, 20:41:40

Hi. Everything works fine but no cw keying. I tried setting Out1 to Keyer on both ends per a previous post but no go. I have the IC-706 keyer disabled and the rig keys fine with a straight key in the key jack. I have a paddle in the pad jack on control and a straight cable to key jack on radio. I hear side tone in the 706 phones jack.There doesn't appear to be any output at the radio pad jack. I sent attachments showing current IO and keyer settings.

73
Joe

Title: Re: IC-706 CW not Keying
Post by: wb4uga on 2012-03-24, 05:25:33

Found problem. Bad cable from RR to Radio. Built new cable. Keys fine now.