Remote Rig

RRC 1258 Support in English => Configuration, RRC 1258 => Topic started by: ur5mid on 2012-11-02, 22:41:24

Title: K3 twin problem
Post by: ur5mid on 2012-11-02, 22:41:24

I have K3/0 and RRC1258MkII (serial # 2600-radio, #2511-control) . I choose " K3 twin" in radio setting, but i dont have button "connect" in window "status". What is problems?
Firmware 2.62

Title: Re: K3 twin problem
Post by: sm2o on 2012-11-03, 00:07:00

There should not be any connect button, Connection is set up automatically when pushing the power on button on the K3/0

73 de mike

Title: Re: K3 twin problem
Post by: ur5mid on 2012-11-03, 00:34:29

I had already read the instructions about it.
but there is no connection at startup. I replaced COM0 parity : 0 to force 1 and all is ok. But in local net, next step-internet connection.

Title: Re: K3 twin problem
Post by: sm2o on 2012-11-03, 09:59:10

Parity should absolutely not be used. Use the settings desribed in the manual.

73 de mike