Remote Rig
RRC 1258 Support in English => Hardware, Cabling, Installations => Topic started by: iw1gap on 2012-11-14, 23:44:05
-
Good evening everyone, I posted a message last night, but got lost. I try to rewrite it.
I have a Radio control with hardware version 6.
Can I use it with radio remote control version 7?
While inserting the correct parameters will always appear sip error and, in version 7, I saw that there is a SIP voice out / in on port 5060. How can this be? I do not have the firewall.
Thanks for the replies.
Andrea IW1GAP
-
Andrea,
Never, ever use port 5060 for SIP! Virtually every router sold in Europe
has this port for VoIP blocked and it won't work!
As for the hardware, I suppose Mike should answer. I can't imagine why
it should be a problem, though.
73,
Mitch DJ0QN / K7DX
-
The only difference between v6 and v7 is that in V7 there is a new jumper which makes it easier to connect to a FT-857.So you can combine v6 and v7 without ptoblem. The other question I do not understand. 5060 is the default port for SIP.
73 de mike