Remote Rig
RRC 1258 Support in English => General discussion forum => Topic started by: DM1CG on 2013-02-24, 21:17:39
-
Hy all
I have tested the weekend much with TS-480 .
I found out, sometimes I canīt RE POWER ON the Station ,after power off.
Inside the home network all is running fine .
If i didt can re power on the Station the yellow LED da AUX / MIC is blinking.
By rest my ADSL Router / get a new IP Adresse I can re Power on the Station again.
any one know the problem
best 73 de Carsten
-
hallo carsten,
bitte eine mail direkt an mich senden: dj0qn (at) darc.de und ich kann dir bestimmt helfen.
bitte das problem in der mail nochmal beschreiben.
73,
mitch DJ0QN
-
Hy Guys
I tested more and I get again it.
I take an other UNIT RRC 1258 - client side - FW 2.68
Make the setup like my Control Unit
Over the WEB interface I make 10 -15 Connect - Disconnects with a break around 10sec.
Now a got no connects more. I produced an SIP Error. I am not able to do an conenct again.
Now I have to swap my public IP adresse .. on that place I have a fix one. :-(
Name Value
Control panel OFF
Radio OFF
Connection status Disconnected
SIP status Unknown(1)
Last SIP error SIP Error
RTP/UDP audio status Disconnected
UDP cmd status Disconnected
SIP command timeout 4
Rx Jitter buffer size 4
Rx Jitter delay 3
Dual Rx 0
SIP Out port 11060
SIP In port 11060
Audio Out port 11050
Audio In port 11050
Command Out port 11040
Command In port 11040
External SIP In port 11060
External Audio In port 11050
External Cmd In port 11040
Other party IP ADRESSE
Input 0 High
Input 1 High
Input 2 High
Output 0 High
Output 1 Low
Output 2 Low
DNS status OK,
Active profile: DM1CG
PTT status: OF
-
Yesterday at Remote side I get the same Error.
I was inside the same IP network !
I made one connect - working some W Station on 10m.
Power off the station... repower -> SIP ERROR.
I give the control unit another IP , but same SIP ERROR.
Disconencted the power supply at the radio side and i can connect again.
One Time -> SIP Error
?
Best 73 de Carsten