Remote Rig

RRC 1258 Support in English => General discussion forum => Topic started by: luigi.pink on 2013-04-07, 13:11:14

Title: Elecraft K3===>>> lightning protection
Post by: luigi.pink on 2013-04-07, 13:11:14

Hello,
recently I purchased a  remotering RRC 1258 MKIIS  :) connected by internet with:
-Elecraft K3/0 (local radio)
-Elecraft K3/100 (remote radio)

Question: is possible switch ON/OFF  the line connection antenna/Elecraft K3/100 remotely (to prevent damage by lightning)?
If the answer is affermative wich is the system more effective to use?
Someone has recommended the use relays but I doubt that could be a lightning protection ... :-\

Thanks

Luigi

Title: Re: Elecraft K3===>>> lightning protection
Post by: sm3jgg on 2013-04-13, 18:38:46

Hi !

I had the same thoughts, and I build me an Webcontrolled Controlled Antenna Connection system.

You can take a lock about my projekt here....   https://sites.google.com/site/sm3jggwebcac/
it´s made of simple easy to find materials.


73 de SM3JGG  Staffan
 

Title: Re: Elecraft K3===>>> lightning protection
Post by: luigi.pink on 2013-05-12, 12:20:08

Hello Staffan,
i check your link....wow compliments for the idea! :)
I try to follows your experience in order to prevent any damage by lightning.
When I ask about the problem all people answer with a negative approach and a lot of fatalism  :-\

THX

Luigi

Title: Re: Elecraft K3===>>> lightning protection
Post by: ON4AOI on 2013-05-14, 12:42:26

Hi Luigi
this can be done with RRC-1258 itself when you use the I/O in and outputs
for this, Check my uploads , drawings at the forum.
I putted a K9AY RX switching system here so with that you can start to build your own needs   

Guy ON4AOI   

Title: Re: Elecraft K3===>>> lightning protection
Post by: luigi.pink on 2013-05-21, 22:14:34

Hi Guy,
THX for your reply.
Unfortunatelly I don't find uploads and drawings in the Forum  :(
Please send again the link :)

Luigi

Title: Re: Elecraft K3===>>> lightning protection
Post by: DL7AV on 2013-05-25, 16:40:05

Hi Staffan,
my compliments for your web controlled Antenna Connection system. Lightning energy is prevented to get into the shack through the coaxial shield. I have not seen that before. You seem to use special N-connectors with no lock nut.

73,  Thomas  DL7AV

Title: Re: Elecraft K3===>>> lightning protection
Post by: sm3jgg on 2013-06-23, 06:41:43

Hello again !

Yes it`s  N   konnectors,
The only special is that the "locking nut" are removed on one side.

I have made a little movie, showing how everything works, it`s on youtube.

http://www.youtube.com/watch?v=6kcHPvUrNK4



73 de SM3JGG  Staffan

Title: Re: Elecraft K3===>>> lightning protection
Post by: VE6SH on 2013-06-23, 17:58:29

This is excellent Staffan. Thank you.

Tim VE6SH

Title: Re: Elecraft K3===>>> lightning protection
Post by: pd0swl on 2013-06-23, 20:33:01

As the connectors slowly approach I expected sensational arcing :-)

Excellent craftmanship Staffan and a really good idea.

Thanks for the movie.

73
Paul
PD0PSB

Title: Re: Elecraft K3===>>> lightning protection
Post by: KX7M on 2013-11-20, 20:38:14

Nice idea Steffan. Just out of curiosity, how do you verify that connectors are fully disconnected, other than not having any signals on any band? I mean how do you specifically know the motor has turned enough to stop at your programmed separation distance? Or do you just use webcam?