Remote Rig

RRC 1258 Support in English => Hardware, Cabling, Installations => Topic started by: KP4TR on 2013-09-03, 04:40:04

Title: Soft Restart via external button
Post by: KP4TR on 2013-09-03, 04:40:04

Hello,

I would like to install a restart button on the back of both my Remoterig controls. I can wire it to the power input so power is temporarily disrupted to restart RRC Control when button is pressed. Is there a "soft restart" point on the board I can use to do this? The RRC already has a "hard reset", but a "soft restart" would do nothing more than a reboot, similar to when any setting is changed and restarted.

Thanks.

Title: Re: Soft Restart via external button
Post by: sm2o on 2013-09-03, 08:05:23

Hi I don't see why you need another type of reset than the existing reset button ? if you press the reset button for a short moment the same happens as when you press reboot in the webinterface

73 de mike

Title: Re: Soft Restart via external button
Post by: KP4TR on 2013-09-04, 02:15:14

So the reset in the back will not erase configuration or reset back to defaults? If that's the case then that's what I needed to know.

Thanks.

Title: Re: Soft Restart via external button
Post by: sm2o on 2013-09-04, 07:56:08

No. You have to keep it pressed for 20-25 sec to erase and set deault params.

/mike