Remote Rig

RRC 1258 Support in English => Configuration, RRC 1258 => Topic started by: mi3nju on 2013-10-15, 02:21:31

Title: TS480
Post by: mi3nju on 2013-10-15, 02:21:31

ALARM GOING OF IN HEAD UNIT WHEN CONNECTED AND WONT TURN ON CAN ANYONE HELP

Title: Re: TS480
Post by: sm2o on 2013-10-15, 07:50:34

You do not say if you are on a local LAN ? if you are check the SIP contact setting (on a LAN it should be set to the same IP address as the IP of the Radio-RRC). The tone you hear means that the Control-RRC can not get in contact with the Radio-RRC. If you are trying over the Internet it can be the SIP- contact which is wrong, but also that there is no Port forwarding done in the Router at the Radion end.

73 de mike

Title: Re: TS480
Post by: mi3nju on 2013-10-15, 10:03:48

sorry mike they are both conected to my router  and port fowarding was done

Title: Re: TS480
Post by: sm2o on 2013-10-15, 10:16:01

As long as both are connected to the same router no portforwarding are needed. Just enter the Radio-RRC IP -number as SIP-contact in in the Control-RRC

/mike

Title: Re: TS480
Post by: dj0qn on 2013-10-15, 12:18:22

If you need help with the network installation process, just drop me a short mail
to dj0qn (at) darc.de and I will send you my networking checklist. This has helped
over 200 people get their setup working so far.

73,
Mitch DJ0QN / K7DX

Title: Re: TS480
Post by: mi3nju on 2013-10-15, 22:46:40

got it going but audio clipping  on outward transmission