Remote Rig

RRC 1258 Support in English => Configuration, RRC 1258 => Topic started by: Stan W6VQ on 2013-11-05, 06:05:51

Title: Firmware update problem
Post by: Stan W6VQ on 2013-11-05, 06:05:51

I successfully updated the firmware on Wi-Fi optioned RRC's from 2.74 to 2.75 then decided to also update the RRC's used
with my IC-7100 from 2.72 to 2.75.  All went well with the radio side but failed on the control side.  Radio no longer powers
up thru RRC but fine with head connected directly.
Doing a read shows the following- VRS=005  Firmware=000.000.002  Boot=N/A  HW=006    Serial # C3092
Computer running XP and USB port functioning normally.  Rebooted and tried a second time with same results.
Sequence seemed to show everything normal with RRC restarting after successful download and update.
Anything else to try?

Title: Re: Firmware update problem
Post by: sm2o on 2013-11-05, 10:11:49

Have you try to connect to the box via the webinterface ?

/mike

Title: Re: Firmware update problem
Post by: Stan W6VQ on 2013-11-05, 22:09:48

Updated RRC thru web browser and correctly shows 2.75 and radio now connects.
Setup manager (1.24) still shows 000.000.002 instead of 2.75 but seems to function
normally.  TNX& 73, Stan

Title: Re: Firmware update problem
Post by: Jan (Microbit) on 2013-11-06, 09:06:22

Thank you for pointing out that the FW version is not displayed as it should in Setup Manager. We will fix that in the coming release.