Remote Rig

RRC 1258 Support in English => General discussion forum => Topic started by: ea3in on 2014-02-22, 09:37:31

Title: Acom2000A Switch on via I/O port
Post by: ea3in on 2014-02-22, 09:37:31

Hello

I am working on integration my ACOM2000A into my remoterig setup
For now I am experimenting with ACOM Director via a PC serial port. It works
What I am missing is the ability to power on the amplifier if it is off.

I think that if you send a pulse to pin 5 on the RCU cable, it will switch on.
Is it true?
A pulse or a continous switch?
Can I do something with the remote RRC I/O port?

Thanks in advance

Title: Re: Acom2000A Switch on via I/O port
Post by: dj0qn on 2014-02-22, 13:21:44

Take a look at:

http://www.remoterig.com/forum/index.php?topic=613.msg2410#msg2410

73,
Mitch DJ0QN / K7DX

Title: Re: Acom2000A Switch on via I/O port
Post by: ea3in on 2014-02-22, 17:00:41

Thanks Mitch

A 1sec pulse works for me