Remote Rig

RRC 1258 Support in English => Configuration, RRC 1258 => Topic started by: W9AEB on 2014-06-18, 22:16:02

Title: UDP CMD Status Error 0
Post by: W9AEB on 2014-06-18, 22:16:02

On the status page I'm getting UDP CMD =  ERROR 0.  I'm configured with an Icom 706 MKIIG.  The radio via the RRC works except I have no display.  Any ideas or suggestions would be greatly appreciated. 73, Tom, W9AEB

Title: Re: UDP CMD Status Error 0
Post by: sm2o on 2014-06-18, 23:45:38

Hi

The counter counts down to 0 when no data is comming in. Probably one of the red strap wires in the radio-RRC is broken or the data line in the cable between the Radio-RRC and radio.

73 de mike