Remote Rig
RRC 1258 Support in English => Configuration, RRC 1258 => Topic started by: kk4mqm on 2014-09-02, 22:12:14
-
Hello, I have a ts 480 and can get the units and radio to work at my qth; when I go to another site, the control device says "not reachable" and radio only beeps a couple of times and will not turn on. Any help is greatly appreciated. Thanks Phil
-
Phil,
Drop me a mail at dj0qn (at) darc.de and I will send you my networking checklist that walks you
through the process of setting this up.
The most common mistakes here are not using the correct IP address in the SIP contact field, or
in the router, but my checklist covers these as well.
73,
Mitch DJ0QN / K7DX