Remote Rig
RRC 1258 Support in English => General discussion forum => Topic started by: IZ3ENH on 2010-07-03, 00:08:58
-
Hi from Italy.
After long time of test from my home (radio) to my office (control), I ended the remote site and started with same configuration, but from home (control) to remote site (radio).
The remote site is connected to internet via a Mikrotik LAN, that work very well.
The problem:
all is working, but there is NO modulation when transmitting. The rx is ok.
I tryed also to change the UDP audio port (now is 11060) and setting to 0 the audio quality for low bandwith, but nothing.
All is working, also with a very little delay, but no modulation out.
What you think????
Thanks for the help,
Stefano
IZ3ENH
-
Hi
If it works when the RRC:s are connected on the same network the RRC-settings are OK.
There must be some settings in the Mikrotik Equipment which is not ok.
Maybe you have already solve it
73 de mike