Remote Rig

RRC 1258 Support in English => General discussion forum => Topic started by: KAZUYA on 2014-12-25, 02:09:25

Title: K3/0 mini and RRC1258MK2 JMP setting
Post by: KAZUYA on 2014-12-25, 02:09:25

I am useing TS-480 with RRC-1258mk2. working very well.  I will chenge my rig to K3/0 mini at control site and K3 at radio site.
But I dont understand setup JMP1...JMP5 in RRC-1258mk2.

RRC-1258mk2 control site
JMP1 in place ? / JMP2  ?  / JMP3  ? /  JP4 ? / JMP ?

RRC-1258mk2 Radio site
JMP3 in place ? / JMP5 in place ?

I will use MH-2 condenser microphone with k3/0 mini.

Title: Re: K3/0 mini and RRC1258MK2 JMP setting
Post by: dj0qn on 2014-12-25, 03:14:44

Just compare the two pages in the RemoteRig manual, not really that hard.....
the only difference between the two rigs is that JMP1 is on for the K3, since you
need bias for the microphone MH-2. All other straps and jumpers stay as they are.

73,
Mitch DJ0QN / K7DX

Title: Re: K3/0 mini and RRC1258MK2 JMP setting
Post by: KAZUYA on 2014-12-26, 09:12:45

Thank you Mitch san.  I will try.