Remote Rig

RRC 1258 Support in English => Configuration, RRC 1258 => Topic started by: RobG0WSC on 2015-01-22, 20:36:36

Title: Control
Post by: RobG0WSC on 2015-01-22, 20:36:36

Hi control rrc1258mk11 won't connect to Internet remotely power light keeps flashing worked ok at home qth not sure what to do any help would be appreciated

Title: Re: Control
Post by: dj0qn on 2015-01-22, 21:04:43

Drop me a short mail to dj0qn ( at ) darc.de and I will send you my networking checklist that walks you through the installation process.

73,
Mitch DJ0QN / K7DX

Title: Re: Control
Post by: sm2o on 2015-01-23, 08:25:17

Yes flashing power LED  can have only two reasons. Either it cannot not obtain a IP address from the DHCP server or it cannot connect to a DNS server. If you use fixed IP for the RRC then the problem can only be the DNS connection.  Check the status page it will probably tell you that DNS is the  problem. If you do not know the DNS IP Google DNS 8.8.8.8 works in most cases. You can also activate DHCP and let the RRC find out all the IP settings from the DHCP server, then you can decide to store the settings and use fixed IP

73 de mike