Remote Rig

RRC 1258 Support in English => Configuration, RRC 1258 => Topic started by: K1UO - Larry on 2015-05-05, 21:29:54

Title: Remote RRC1258 STATUS port values
Post by: K1UO - Larry on 2015-05-05, 21:29:54

OK..now the next question.  The STATUS page of the remote RRC1258 Has a Command out port value of 1024 and a Command in value of 13002.    The remote router is configured correctly to allow port 13002 for both UDP and TCP.  I notice the SIP and Audio ports in/out values for 13000 and 13001 match each on the RRC1258 Status page  but the Command in/out ports do not and nothing I do changes the Command out port value from 1024.   Is this normal?     

Title: Re: Remote RRC1258 STATUS port values
Post by: dj0qn on 2015-05-05, 22:21:37

yes

73,
Mitch DJ0QN / K7DX

Title: Re: Remote RRC1258 STATUS port values
Post by: K1UO - Larry on 2015-05-06, 15:03:32

Thanks Mitch....  I see all the in/out ports with equal values on my local LAN RRC pairing  but not on the Remote RRC 1258 so was wondering if it was contributing to some of the problems there.
 This is the best place I can find for "answers".

Title: Re: Remote RRC1258 STATUS port values
Post by: dj0qn on 2015-05-06, 17:26:58

No problem, Larry. If you can describe your problems more clearly, maybe someone can figure out how to help.
Often the problem lies with the router, but most assume it is with the RRC. I can maybe take a look with
Teamviewer or otherwise see if I can help if I knew more details.

73,
Mitch DJ0QN / K7DX