Remote Rig

RRC 1258 Support in English => Hardware, Cabling, Installations => Topic started by: K2MK on 2015-09-02, 13:34:52

Title: Jumper 4 Clarification
Post by: K2MK on 2015-09-02, 13:34:52

I'm setting the jumpers on the control RRC and I'm a bit confused by the manual text and illustration on page 24. I want to set up the SP output for headphones. So should the jumper be in place or should it be removed. The illustration suggests that there might be 3 pins. My unit has 2 pins. My RRC model number is RRC-1258MKIIs V7.

73,
Mike K2MK

Title: Re: Jumper 4 Clarification
Post by: sm2o on 2015-09-02, 13:59:59

Hi

There is no jumper at all in v7 for that. It's always 2 speaker outputs

73 de mike

Title: Re: Jumper 4 Clarification
Post by: K2MK on 2015-09-02, 15:27:19

Thank you. You are correct. I took out my larger magnifying glass and I can now see that the jumper I was questioning is actually JMP5. There is no JMP4.

73,
Mike K2MK