Remote Rig

RRC-Micro PC Client in English => General discussion => Topic started by: dj1aus on 2015-10-30, 12:38:14

Title: How can I test RRC Micro PC Client again?
Post by: dj1aus on 2015-10-30, 12:38:14

Hi,

it looks like I tested and installed the RRC Micro PC Client already a while ago, but I never really used it because I have a RRC-1258MKII standing here and I am using mainly the RS-BA1 Remote Control Software from Icom to controll my Transceiver.
But now I have the feeling the RS-BA1 is a little too slow - the update of the screen regarding the Signal strength and so on is delayed. when I am using the RS-BA1 to connect to the remote station (have a PC placed there which is connected via USB to the IC-7200 to control the transceiver too) its responding like a charme. BUT: I cannot CW remotely with the Icom Software. AND: I cannot use the remote control and the Logbook at the same time. Therefore I wanna use the RRC but I need another control software which is a little more responsive.

Therefore I wanted to test again the Micro PC Client - but after install it tells me the trial has expired. How can I test it one more time?

Please help!

Alexander

Title: Re: How can I test RRC Micro PC Client again?
Post by: roland on 2015-11-02, 08:24:11

You should be good for registering another trial now.

Title: Re: How can I test RRC Micro PC Client again?
Post by: dj1aus on 2015-11-03, 23:45:49

Hello Roland,

sorry, but something really goes wrong.
On my PC it tells me the trial expired and on my Notebook I was not able to install it.
When the installation finish and I start the Software for setup and 1st steps I do get following error.

Can you help?

I love my hardware system (RRC-1258) but I'm regulary traveling and I cannot take the RRC all the time with me. The Software Solution with the Dongle sounds like the perfect solution.

But first I wanna test how it connects and so on.
I hope you understand and can help.

Greetings

Alexander

Title: Re: How can I test RRC Micro PC Client again?
Post by: roland on 2015-11-04, 09:53:55

The Notebook. 64bit? Windows?

Title: Re: How can I test RRC Micro PC Client again?
Post by: dj1aus on 2015-11-04, 12:49:42

yes Windows 10 final (official release)

the other PC windows 10 (Preview Release Build 10576)

Greetings
Alexander

Title: Re: How can I test RRC Micro PC Client again?
Post by: roland on 2015-11-04, 12:58:20

Can you check if there is a <Documents>/MibrobitLogs/RRCMicro.log file and in such case send it to me.

Title: Re: How can I test RRC Micro PC Client again?
Post by: dj1aus on 2015-11-07, 13:51:05

Hi,

sorry, I was on business journey:
here's the log.

Greetings

Alexander

Title: Re: How can I test RRC Micro PC Client again?
Post by: roland on 2015-11-09, 10:00:50

Hi Alexander.

I can see in the log that you once had a dongle attached to this PC.
The license system works like this. Once you have attached a dongle
its registered and no more trials are allowed. To run the software on
this PC you just have to attach the dongle.