Remote Rig

RRC 1258 Support in English => General discussion forum => Topic started by: GM8WJK on 2016-02-04, 22:39:28

Title: I get I get "It works! This is the default web page for this server. The web s
Post by: GM8WJK on 2016-02-04, 22:39:28

I had the units working perfectly for a day then I lost contact. I got a friend to check the radio unit and the ip address had changes so the router is clearly not updating the ip address at dyndns.org. Since I cannot return to the radio unit site for 2 weeks, I manually updated the ip address at dyndns, I then get:

 "It works!

This is the default web page for this server.

The web server software is running but no content has been added, yet."   

 when I log into the radio unit over the internet.

Any suggestions?
Many thanks
Jim

Title: Re: I get I get "It works! This is the default web page for this server. The web s
Post by: sm2o on 2016-02-04, 22:57:48

The IP number is not correct, It's not the RRC, you are probably browsing a page from a web hotel somewhere.

73 de mike

Title: Re: I get I get "It works! This is the default web page for this server. The web s
Post by: dj0qn on 2016-02-05, 00:39:28

I would suggest switching to the included Microbit dynamic DNS service. Since it works
straight from the RRC, you don't have to worry about flaky routers.

73,
Mitch DJ0QN / K7DX

Title: Re: I get I get "It works! This is the default web page for this server. The web s
Post by: GM8WJK on 2016-02-05, 07:29:58

Many thanks for the fast response. I'll wait untill I have access to my router again. I did try to set up the microbit dns initially but my router (BT Hub) did not have an option for Microbit  dns in its set up table so I had to go for dyndns.

Regards
Jim

Title: Re: I get I get "It works! This is the default web page for this server. The web s
Post by: Jan (Microbit) on 2016-02-05, 08:55:52

Quote from: GM8WJK on 2016-02-05, 07:29:58

Many thanks for the fast response. I'll wait untill I have access to my router again. I did try to set up the microbit dns initially but my router (BT Hub) did not have an option for Microbit  dns in its set up table so I had to go for dyndns.

Regards
Jim

Our DynDNS system is not configured in your router, only in the RRC itself, which acts as a DynDNS client.

Title: Re: I get I get "It works! This is the default web page for this server. The web s
Post by: dj0qn on 2016-02-05, 13:04:12

Jim,

Please read the manual pages 27-28 where it explains this.

73,
Mitch DJ0QN / K7DX