Remote Rig
RRC 1258 Support in English => General discussion forum => Topic started by: Mike/K3MMB on 2010-12-07, 01:54:10
-
I am using a netbook with windows 7 32bit home prem ...
downloaded current client
ran install as administrator
created 3 com ports
created usb sound device with location at a long series of numbers????
launched client
got many exception errors
repeated all steps, no change..
no idea where to begin corrections, please advise as to possible fixes
regards
mike
-
Hi Mike.
We have got one more report of this problem. Exactly same behavior on a German Windows 7.
The installation has been tested on Swedish and English 32 and 64 bits Windows without those problems.
So my first question is. Do you run your Windows 7 in some other language than English?
Some more questions:
Could you give more information about what you mean by "location at a long series of numbers".
Does all those exceptions show same thing as the one you have show in the image "ComEnum_GetNumPorts"?
Open the Control Panel and select View Devices and Printers. Do you have an unspecified device there called Microbit 1274 A?
If you show the Properties/Hardware, what do you get?
This is how things look at my Win7 64
-
Roland, Thank you for your support.
I am running windows 7 english. attached are my settings. There is a second screen with errors, but it flashes by without being readable. I believe all errors are the same.
The com ports are installed as ports 9-11. The install runs slightly differenet than the script posted on the web site. The comports are installed one at a time via a command script. they process so quickly it is not possible to follow the output.
I do have HRD Beta 5 loaded and it works well with my radio and this computer. I also have echolink, paclink, and airmail loaded.
regards
mike
-
capture of second error screen
-
Thanks Mike.
We are working on the problem.
The first thing is the Exception with ComEnum_ etc etc.
I will rewrite that part tomorrow. I'll get back.