Remote Rig

RRC 1258 Support in English => General discussion forum => Topic started by: W9DTX on 2016-11-16, 20:50:56

Title: Getting a cat 5 cable into the 1269
Post by: W9DTX on 2016-11-16, 20:50:56

Well I got my 1269 and took it apart (in part) to connect the network cable and discovered the hole is too small for any Cat 5 network plug I have.  Any suggestions short of putting the wire in and then adding the plug.  May end up doing this but wanted to be sure I wasn't missing something since I have been known to do that.

Thanks

Henry

Title: Re: Getting a cat 5 cable into the 1269
Post by: sm2o on 2016-11-16, 21:38:20

No, you have to either crimp a new connector to the cable or use the screew headers

73 de mike

Title: Re: Getting a cat 5 cable into the 1269
Post by: W9DTX on 2016-11-16, 22:41:06

Kind of what I figured..

Thanks