Remote Rig

RRC 1258 Support in English => General discussion forum => Topic started by: VK4KY on 2019-02-22, 01:12:06

Title: Can't access webpage after a few days
Post by: VK4KY on 2019-02-22, 01:12:06

Hi,

My K3 pair have been running well for a few months now with only a couple of minor issues. After a restart I can access the webserver in the remote unit to change settings etc. however after a few days I can no longer access it. I can however still connect and operate the remote transceiver.

Any ideas?

Andy  VK4KY

Title: Re: Can't access webpage after a few days
Post by: dj0qn on 2019-02-22, 01:15:08

Andy,

Did you change the port to something other than 80?

73,
Mitch DJ0QN  / K7DX

Gesendet von meinem SM-G955U mit Tapatalk

Title: Re: Can't access webpage after a few days
Post by: VK4KY on 2019-02-22, 22:11:10

Hi Mitch,

The port is still set to 80. If I restart the remote unit it works again for a few more days.

Andy

Title: Re: Can't access webpage after a few days
Post by: dj0qn on 2019-02-23, 06:33:12

Hi Andy,

That is most likely your problem. You should change it to a different port number and forward that
port instead. Address your RRC with a colon following the URL, e.g. rkdgt793.ddns.remoterig.com:XXXX
where XXXX is the new port number. I am pretty sure that your problem will go away then.

73,
Mitch DJ0QN / K7DX

Title: Re: Can't access webpage after a few days
Post by: VK4KY on 2019-03-26, 21:27:34

Hi Mitch,

Initially I did not have a username or password set for access to the web interface. I have now set username and password for the web interface and the system has been running for weeks without any problems.

Andy

Title: Re: Can't access webpage after a few days
Post by: dj0qn on 2019-03-26, 23:07:50

Hi Andy,

Glad it is working well. Did you change the port number?

73,
Mitch DJ0QN / K7DX

Title: Re: Can't access webpage after a few days
Post by: VK4KY on 2019-03-27, 22:55:21

Hi Mitch,

Everything else remained the same. I just added username and password.

Andy