Remote Rig

RRC 1258 Support in English => General discussion forum => Topic started by: N7TWP on 2023-04-11, 23:45:41

Title: 1289 Ant Sw, RRC Settings, and pass thru to the serial port?
Post by: N7TWP on 2023-04-11, 23:45:41

Hi,  This is an advanced use case question.
Does the 1289 have the ability to pass through data received on the RRC UDP port, and communicate that data with the built in serial port?  I would like to send CI-V commands to aa rig connected via the the 1289 serial port.   Is this possible with the current firmware on the 1289?
I had not seen if this is possible in the user manual.   

Perhaps another way to ask the question: is the RRC port on the 1289, strictly to open a UDP communication channel only with the Remote Rig 1258 pair? 
-Karl N7TWP

Title: Re: 1289 Ant Sw, RRC Settings, and pass thru to the serial port?
Post by: sm2o on 2023-04-12, 08:29:46

NO it's not possible to pass through

The ethernet communication can be used to communicate with the AS it does not have to be a RRC, But dont ask for a spec.

73 de mike