Remote Rig
RRC 1258 Support in English => General discussion forum => Topic started by: Dick N4RA on 2023-08-20, 20:02:57
-
I've been using K3/K3-0 with remoterig for many years. My remote internet has been cellular. I recently was forced to convert from 4G/LTE to 5G and my connection has been poor ever since. Specifically, the receive audio is choppy - on/off once a second (although it is ok occasionally).
Both local and remote RRC audio are set to 0(8 kHz) and both COM0 are set to 38400. I suspect a bandwidth problem, but I can't figure how to correct/compensate for it. The 5G signal is fair.
I am using a T-Mobile business service with static IP. Any suggestions what might need to be changed for the 4G to 5G switch?
Dick
N4RA
-
Hi
Remoterig doesn't know or care about 4G, 5G etc. Can't you setup the router to use 4G if the 4G signal is stronger. or set the router to use a fixed band that you want to use, maybe a lower frequency band is better
73 de mike