Remote Rig
RRC-Nano => General => Topic started by: BI1LLM on 2023-08-30, 14:31:18
-
I use RRC nano to connect to icom 7100. After successfully connecting to 1258, the frequency and other information cannot be seen in the control interface, and the sound cannot be heard.I tried two phones, one with MIUI (based on Android 10)The other is HarmonyOS 4 (based on Android 13).
I used a HarmonyOS phone to successfully connect once, but after disconnecting, I couldn't connect again.
(http://)
-
My CVI cable is now connected to com1, must it be connected to com2?
-
https://www.remoterig.com/forum/index.php?topic=7786.0;topicseen
-
My CVI cable is now connected to com1, must it be connected to com2?
How long have you been using the demo-app for? It has a 14 day free trail before you can no longer connect again.
Also make sure that you are running v1.6.6 on Android 13. You can try uninstalling the app and installing the latest version and see if it works better. Make sure that audio permissions are enabled.
-
Hi
what kind of CI-V interface do you use ? You must have a CI-V interface which have a separate power supply, the RRC cannot power the CI-V interface. Normally the CI-V interface is connected to Com2 as the Com2 has male dsub (same as a PC).Com1 has a female dsub and pin2 and 3 are reversed. But com1 can be used but both the app and the RRC must be configured for using com1 and the CI-V must have have pin2 and 3 crossed. You will not hear any audio until CI-V connection is working as the IC-7100 start with volume =0.
73 de mike
-
My CVI cable is now connected to com1, must it be connected to com2?
How long have you been using the demo-app for? It has a 14 day free trail before you can no longer connect again.
Also make sure that you are running v1.6.6 on Android 13. You can try uninstalling the app and installing the latest version and see if it works better. Make sure that audio permissions are enabled.
My probation period is not more than 14 days.
-
Hi
what kind of CI-V interface do you use ? You must have a CI-V interface which have a separate power supply, the RRC cannot power the CI-V interface. Normally the CI-V interface is connected to Com2 as the Com2 has male dsub (same as a PC).Com1 has a female dsub and pin2 and 3 are reversed. But com1 can be used but both the app and the RRC must be configured for using com1 and the CI-V must have have pin2 and 3 crossed. You will not hear any audio until CI-V connection is working as the IC-7100 start with volume =0.
73 de mike
My CVI interface works fine with the RRC micro, but has problems with the RRC nano. I think it might be the com1 tx rx pins that are upside down.
-
My CVI cable is now connected to com1, must it be connected to com2?
How long have you been using the demo-app for? It has a 14 day free trail before you can no longer connect again.
Also make sure that you are running v1.6.6 on Android 13. You can try uninstalling the app and installing the latest version and see if it works better. Make sure that audio permissions are enabled.
I am currently using version 1.6.6 and the situation remains the same.
-
In addition, can you open the purchase permission of Google Play in China?
-
Hi
what kind of CI-V interface do you use ? You must have a CI-V interface which have a separate power supply, the RRC cannot power the CI-V interface. Normally the CI-V interface is connected to Com2 as the Com2 has male dsub (same as a PC).Com1 has a female dsub and pin2 and 3 are reversed. But com1 can be used but both the app and the RRC must be configured for using com1 and the CI-V must have have pin2 and 3 crossed. You will not hear any audio until CI-V connection is working as the IC-7100 start with volume =0.
73 de mike
This is my RRC nano configuration with com1. If you want to help, I can send a private message to connect the password.
(http://)
-
If the radio works with RRC-micro the CI-V cable and RRC settings is ok, but select com1 in the app
73 de mike
-
If the radio works with RRC-micro the CI-V cable and RRC settings is ok, but select com1 in the app
73 de mike
Yes, I chose com1. I have purchased pro but still have problem
-
My guess is that the RRC nano's serial port setting doesn't work and will work with com2 regardless of the value set. Because I set the com2 port status to "Inactive" in the serial port settings of radio 1258，After restarting radio 1258, check again that the state of serial port setting com2 is still "inactive".If RRC nano is connected to 1258 at this time, the port status of com2 will become "mode2 icom cvi".
Therefore, I conclude that the serial port selection of RRC nano is invalid.
-
This problem has been solved after the com port was switched to com2.