Remote Rig

RRC 1258 Support in English => General discussion forum => Topic started by: W1UE on 2024-09-19, 21:58:40

Title: RRC not connecting
Post by: W1UE on 2024-09-19, 21:58:40

I have a remote site with 2 RRCs.  The other day, one of the RRCs stopped connecting.  I've examined the Status Report of each RRC, and I find there are 6 differences between the two setups (not including different port numbers as needed).

Bad RRC:   Audio Out Port 0,         Audio In Port 0,         Cmd Out Port 0,         Other Party 0.0.0.0,              Other Party (mac) entry line missing.
Good RRC: Audio Out Port xxxxx, Audio In Port xxxxx, Cmd Out Port yyyyy, Other Party xxx.xx.xxx.xxx, Other Party (mac) 00:1e:fd:01:92:14

The "Other Party" IP address is my home IP address, as I was the last one that accessed that RRC.  The Audio and CMD ports are all 5 digit numbers in the good RRC.
Are there any hints, from looking at the above lines, as to what I need to do to get the 2nd RRC back on line?  Is there maybe a backup battery inside?
The Ser Nbr of the bad RRC is 4664, and the Ser Nbr of the good RRC is 7919.
Thanks for any assistance!  Dennis W1UE

Title: Re: RRC not connecting
Post by: sm2o on 2024-09-20, 09:39:54

Hi

Send export settings (html) files to support@remoterig.com

73 de mike

Title: Re: RRC not connecting
Post by: W1UE on 2024-10-06, 16:03:08

Thanks for your help.  Your reply led directly to our getting it to work again.