Remote Rig
RRC 1258 Support in English => General discussion forum => Topic started by: UR5FLN on 2025-05-02, 00:27:27
-
Hello Gents,
I use IC-7100 many years with Remoterig and it worked perfect, but now I need to use CW with that setup. If I connect key to IC-7100 like normally via KEY socket on back of "Head" there is so frustrating delay, and work in CW is not possible. When I connect manipulator to radio control box it is producing only dots and radio never go to TX. I am using "Straight" (Old school bug) manipulator. Is it necesary to connect cable on a radio side direct from Radio Control Box to TRX? if I want to setup CW via remoterig boxes? Setup via web interface done both sides radio and remote but it does not work.
Thanks for any ideas.
Sergey
UR5FLN
-
Hi
Yes check the manual. You need a cable from the Radio-RRC to the IC-7100 which should be set to use straight Key. With a standard 3.5 mm stereo cable OUT2 should be set to Keyer in the Radio-RRC
73 de mike