Remote Rig

RRC 1258 Support in English => General discussion forum => Topic started by: OH6KNW on 2025-08-16, 16:43:48

Title: TM-D710 setup lost connection during summer brake
Post by: OH6KNW on 2025-08-16, 16:43:48

Hello, my setup has been working well for the last 14 years, but after returning from summer vacation, I can no longer start my radio remotely from the panel. The challenge is that, since it had been working well for a long time, I’ve forgotten how to check things or access the settings. So, I'm looking for an easy solution to fix this.

From a hardware point of view, I don't think anything has changed during the summer, so the issue must be something else. What steps do you recommend for troubleshooting?

As I recall, the green LED should blink for a while and then stay steadily lit when the connection is good. That seems to be the case now, so I believe some communication is happening.

73 de OH6KNW / HB9FDL Teemu

Title: Re: TM-D710 setup lost connection during summer brake
Post by: sm2o on 2025-08-16, 17:52:31

Hi
If you know that the radio-rrc has power and Internet is working at both ends i would guess that the ISP in the radio end has introduced Carrier Grade NAT. You check that like this http://www.remoterig.com/wp/?page_id=3494 (http://www.remoterig.com/wp/?page_id=3494)

73 de mike