Remote Rig
RRC 1258 Support in English => Configuration, RRC 1258 => Topic started by: N6MEH on 2026-03-31, 06:13:11
-
Hello,
Has anyone gotten a RRC1258 to work on a Wifi7 network? I've updated my network router to an Asus ZenWiFi BQ16 Pro. Everything else in my network (including 40+ IoT devices) are working fine, but the RRC client device won't connect.
It finds the network when using "network scan", but when telling it to connect, it just blinks the green LED. I didn't change the network name or WPA password when updating the router.
Is there a way to check the logs in the device to determine why it isn't connecting ?
Is there a known issue with Wifi 7 where some setting in the router needs to be changed? I've included the settings as attachments to this post.
-
Responding to my own thread, but I believe I've found the answer:
The hardware in the RRC1258 only supports 802.11B. It does not support 802.11G. The issue with WiFi 7 is that they phased out the old WPA-based security for networks and replaced it with requiring a minimum of WPA2. The wireless card in RRC1258 does not support WPA2. It is constantly failing out trying to use old-style WPA connectivity on the new router. I found a bunch of "mismatched authorization packet" errors in the router logs after enabling additional logging to support this conclusion.
As far as I can tell, the only way to connect a RRC1258 to a Wifi 7 network is:
1) Don't run Wifi 7 at all so that you can keep running WPA
2) Run the ethernet jack on RRC1258 to a wireless bridge that supports a later version of the Wifi standard
It isn't a great option, but until and unless RemoteRig releases an updated device that has better Wifi support, this is about all there is.
There are several companies that make Wifi 6 and Wifi 7 bridges, so luckily the needed parts seem to be easily available.