Remote Rig

RRC 1258 Support in English => Configuration, RRC 1258 => Topic started by: N9ILS on 2011-06-28, 22:32:36

Title: Remoterig, Cradlepoint CTR500, and Verizon USB
Post by: N9ILS on 2011-06-28, 22:32:36

This setup works fine for internet access. It also works fine with IRLP connected to it. But when we connect the 1258, which is working on my wireless router at home just fine, it gives the three tones indicating it is not connecting to the internet.

Are there ports that need to be opened? It does this even if set as DMZ though.

Title: Re: Remoterig, Cradlepoint CTR500, and Verizon USB
Post by: NN5O on 2013-09-27, 18:37:37

N9ILS, we are having trouble with hooking up using the Verizon router.  Did you fix your problem?  Please advise at carmodyjim at yahoo dot com.
Thanks,
Jim NN5O

Title: Re: Remoterig, Cradlepoint CTR500, and Verizon USB
Post by: KB8CR on 2013-09-28, 03:17:14

If you are connecting the RRC-Radio box to the cradlepoint, then YES, you will need to forward the ports (all 3 of them) to the RRC.

If you are using the cradlepoint to connect the RRC-Control box, you should not have to forward ports.

Charlie KB8CR