Remote Rig

RRC 1258 Support in English => General discussion forum => Topic started by: N6IE on 2011-12-11, 03:35:22

Title: Can't get PTT working with FSK RTTY
Post by: N6IE on 2011-12-11, 03:35:22

The PTT works fine in SSB and CW, but using the configuration described in the manual with MMTTY and RRC1258 COMFSK installed and showing connected to COM3, there is no PTT generated when MMTTY is sending.

MMTTY PTT & FSK is set to COM3, Tx Port to COM-TxD(FSK) and USB Port to "C".

In RRC Radio, OUT0 Mode = I/O,  OUT1 Mode = Baudot/45, OUT2 Mode=Keyer
In RRC Control, IN0 Mode = Keyer, OUT0, OUT1, OUT2 Mode = I/O, both USB settings are disabled.

Software is 2.46

I can manually trigger PTT using the normal mic PTT.  Can anyone tell my why PTT won't key from MMTTY?

Thanks,
Ron
N6IE

Title: Re: Can't get PTT working with FSK RTTY
Post by: dj0qn on 2012-01-12, 16:40:06

Hi Ron,

Did you ever get this working?

73,
Mitch DJ0QN / K7DX