Remote Rig

RRC 1258 Support in English => General discussion forum => Topic started by: sm3ccm on 2012-01-16, 12:14:20

Title: Need MOXA setup help.
Post by: sm3ccm on 2012-01-16, 12:14:20

I got my hands on a MOXA NPort 5410 ( 4 RS232 COM ports). I installed the box inside the LAN and it seems to work OK. I can't figure out how to set it up to be able to access from the outside world using DDNS ( sm3ccm.dyndns.org:xxxx ). I'm using a DOVADO router, no DMZ so using port forward. Any hint how to set it up? 73 de Lars

Title: Re: Need MOXA setup help.
Post by: dj0qn on 2012-01-16, 12:17:31

Lars,

Each port has its own port number. You just need to forward these ports in your router
to the correct internal IP number. Nothing very complicated.

They can then be reached at your Dynamic DNS address and those port numbers.

73,
Mitch DJ0QN / K7DX