Remote Rig
RRC 1258 Support in English => Configuration, RRC 1258 => Topic started by: DL7AV on 2012-02-03, 12:56:43
-
I now have 3 useless profiles due to playing around with the settings at different locations. When choosing one of those the access is blocked and I have to use the setup manager via USB to get to the default profile. How to delete profiles? And how to rename them?
73, Thomas DL7AV
-
From version 2.52 you don't have to give user name and password immediately after changing profile. That will allow you to change user name and/or password before applying settings and so unlock the profile.
Profiles can't be deleted. Renaming is possible, just change the name in the text box and hit Submit.
-
Thank you Jan. But there may be a misunderstanding. As you said I changed from default profile to the profile that does not give me access, but did not submit. Then I changed my password in the IP settings and applied. Same result, the profile does not work because it is looking for a wrong network (as I can see in the “Net info” in the setup manager). Any way to change the settings of the profiles which look for a different network? Factory reset??
73, Thomas DL7AV
-
So "blocked" means the profile you change to has the wrong IP settings for the network the RRC is in? Or do I misunderstand you once again? ;) If not then it sounds to me like you just have to change to the profile in question, change its IP settings, submit and finally apply settings.
-
"So "blocked" means the profile you change to has the wrong IP settings for the network the RRC is in?" YES
This is the exact info:
profile: “default”, good connection
IP address 192.168.178.29
Netmask 255.255.255.0
Gateway 192.168.178.1
DNS 192.168.178.1
profile: “dl7av”, must be changed or deleted, wrong network settings. By Setup Manager:
IP address: 192.168.0.29
Netmask : 255.255.255.0
Gateway : 192.168.0.30
DNS : 0.0.0.0
-
But fixing that should be possible, like I described above.
Taken out of memory without an RRC here to check with:
1/
Select the "default" profile using Setup Manager. (So that its network connection will work)
2/
Browse to the RRC's home page from a PC. (http://192.168.178.29)
3/
Change profile to "dl7av" from the web browser.
4/
Change IP settings to those of the "default", still using the web browser. Remember to "Submit".
5/
Finally "Apply" the settings, which will restart the RRC using the working just changed IP settings for the still active profile "dl7av".
-
Thank you Jan, good service!
But "Remember to "Submit"" has to be moved to 3/
Works fine now.
73, Thomas
-
Thank you Jan, good service!
But "Remember to "Submit"" has to be moved to 3/
Works fine now.
73, Thomas
Great that you got it working! I would not say it should be moved to 3/, but added, since you have to Submit when changing profile too ;)