Remote Rig

RRC 1258 Support in English => General discussion forum => Topic started by: SV1DH on 2010-01-20, 19:14:40

Title: INFO on CW switching
Post by: SV1DH on 2010-01-20, 19:14:40

Hi ALL
Can anyone help and inform me if: are ALL three UT0,1,2 I/O OUTPUTS on radio RRC unit keying (ON-OFF) simultanously during CW keyer operation, or ONLY the I/O output UT0 is keying (ON-OFF) as the CW output of the keyer??
Tnx & 73
Costas

Title: Re: INFO on CW switching
Post by: sm2o on 2010-01-20, 19:42:07

Hi
Today all 3 outpus are keyed in parallell when the CW-keyer is activated. In the future we plan to make it possible to select which one will be keyed. The other will be activated via the web or activated when the SIP connection is up. Then it could be used to switch on the radio when the connection is up.

73 de mike

Title: Re: INFO on CW switching
Post by: DH8BQA on 2010-01-27, 23:30:21

Hi Mike,

that sounds really great, could be useful for some extra switching capabilities. ;)

73, Olli