Remote Rig

RRC 1258 Support in English => Configuration, RRC 1258 => Topic started by: acroplt on 2012-07-23, 16:27:11

Title: DMZ setup
Post by: acroplt on 2012-07-23, 16:27:11

Does the router on the control end need to to be configured with the RRC in a DMZ also?

Title: Re: DMZ setup
Post by: dj0qn on 2012-07-23, 16:29:08

No, only the radio side needs to have the ports forwarded or be placed in the DMZ.

73,
Mitch DJ0QN / K7DX

Title: Re: DMZ setup
Post by: xplane on 2012-07-23, 19:18:39

But if you have an outgoing firewall at your control-site (like me), you should open the ports 12000 UDP (cmd), 11000 UDP (audio) and 5060 TCP/UDP (sip).

Title: Re: DMZ setup
Post by: acroplt on 2012-07-24, 16:00:46

Thanks to both of you for the help - think I have everything configured and everything seems to work well, just have not taken it to the control rig on the trip yet  8).

Title: Re: DMZ setup
Post by: dj0qn on 2012-07-24, 16:11:22

If you need a copy of my networking setup checklist, drop me a mail directly at
dj0qn (at) darc.de. It may prevent problems by using my checklist.

73,
Mitch DJ0QN / K7DX