Remote Rig

RRC 1258 Support in English => General discussion forum => Topic started by: dj3ng on 2012-09-24, 08:51:41

Title: Yaesu Twin with 2 FT-950 - Radio turns off
Post by: dj3ng on 2012-09-24, 08:51:41

Hi all,

Yaesu Twin with two FT-950 works fine with one exception: If I change in search mode to quickly the frequency, the remoted radio turns off. When I turn on und off after a few seconds the control radio, all works fine again. The same happens with PC-Client and Software like HRD or PCC-950. The speed of the serial port is 38.400 Bd, I have tested 19200, 9600, 4800 - with the same result. Any idea ?

73 de Sigi,DJ3NG   

Title: Re: Yaesu Twin with 2 FT-950 - Radio turns off
Post by: sm2o on 2012-09-24, 15:21:12

Tuning the VFO very fast needs a lot of bandwidth, are you sure you have enough in both directions. You can test also what happens if you reduce the audio quality.

73 de mike

Title: Re: Yaesu Twin with 2 FT-950 - Radio turns off
Post by: dj3ng on 2012-09-25, 19:40:57

Mike tnx , Audio quality was "alaw 8 kHz". Bandwidth is LTE 3600, hope to get more in a few month.... !

73 de DJ3NG