Remote Rig
Info from Remoterig => News => Topic started by: roland on 2013-02-22, 10:14:43
-
News:
---
Changes:
- Same color on Contact field as the other fields in the Profile editor
- Changed default ports SIP=13000, RTP=13001, CMD=13002
Fixes:
- Some illegal character in the Contact fields was previous allowed, causing an save error.
Now only legal contact characters are allowed. Those are letters, digits, -, _ and space. - Double and missing characters in CW-keying
IMPORTANT!
If your previous version is 1.6.1 or older uninstall previous version first. After you might get problems with
the virtual COM ports on some computes. If that’s the case, please install again a second time. That normally
fixes those problems. Not needed if your current version is 1.6.2 or newer
This version needs RRC firmware 2.68 (http://www.remoterig.com/firmwares/RRC-1258-CRC_v2.68_2013-02-20.zip)or newer
Download (http://www.remoterig.com/firmwares/RRCMicro_1.6.4.zip)