Remote Rig

RRC 1258 Support in English => General discussion forum => Topic started by: LA0BY on 2010-04-11, 15:41:35

Title: CW with IC-706
Post by: LA0BY on 2010-04-11, 15:41:35

Hi all,
just tried my new RemoteRig MkII for the first time. Everything seems to work fine, except for the CW keying. When I key at the RRC Controller PAD input, nothing happens at the RRC Radio PAD output. I can hear the side tone from the IC-706 panel, but no keying of the IC-706 radio. Is there any configuration I need to do e.g. in the I/O settings?

73, Stefan (LA0BY)

Title: Re: CW with IC-706
Post by: sm2o on 2010-04-11, 19:28:11

Hi

Yes you have to decide which output you wan't to use för the keyer output see under the IO meny in the Radio RCC. Its desciribed here http://www.remoterig.com/en/common_configs.htm

73 de mike

Title: Re: CW with IC-706
Post by: LA0BY on 2010-04-17, 08:19:17

Many thanks Mike. It works fine now with OUT1 activated and mode set to Keyer.  :)