Remote Rig

RRC-Micro PC Client in English => General discussion => Topic started by: k9uk on 2013-11-30, 20:15:01

Title: RRC-Client
Post by: k9uk on 2013-11-30, 20:15:01
Just installed RRC-Client and I am trying to connect to my RRC-1258 mkII - Radio -- The RRC-1258 control has no problem and I can see the RRC-1258 radio on the web -- Using a 706 mkIIG and a Mac with the Windows portion of the hard drive --  Using the same ports etc for the RRC-Client as the RRC-control --- Any suggestion would be appreciated..

Thanks,
Dave - k9uk
Title: Re: RRC-Client
Post by: roland on 2013-12-01, 00:13:04
MAC bootcamp is not supported.
Title: Re: RRC-Client
Post by: k9uk on 2013-12-01, 16:40:43
ok -- Thanks for the reply
Would you be able to send me the Network Checklist via email ???
Title: Re: RRC-Client
Post by: dj0qn on 2013-12-01, 19:08:41
I think you are referring to my checklist......please drop me a mail at
dj0qn (at) darc.de and I will send it to you. I otherwise won't know
your e-mail address.

73,
Mitch DJ0QN / K7DX
Title: Re: RRC-Client
Post by: k9uk on 2013-12-02, 00:38:35
Mitch,
email will be posted -- Also, just tried RRC-Micro on a desktop on my home network and the green bar is lit as well as a bars on the speaker indicator -- However the only sound I can hear is a motorboat on the speaker and HRD will not connect -- Any help would be appreciated --
73,
Dave - K9UK
Title: Re: RRC-Client
Post by: k9uk on 2013-12-09, 00:26:29
After updating the firmware on the 1258 I proceeded to connect the 1258 to a spare 756 -- All is well and I can hear and control the rig -- I did try RRC-Micro on a Mac in the Windows partition and it does seem to work --
More experiments in order - Will post results
73,
Dave
Title: Re: RRC-Client
Post by: k9uk on 2014-01-07, 04:09:52
More experimentation with the Micro and a Macbook air -- When I open the program in the Windows partition of the hard drive all will work most of the time -- I have not been able to determine what will cause the program not to function correctly but the symptoms when it does not work have something to do with the com port selection not being available.  Also, the program wants a usb speaker connected.  When it works it works well.