Remote Rig
RRC 1258 Support in English => Configuration, RRC 1258 => Topic started by: K6ZLY on 2014-02-07, 08:07:20
-
I desire a check list in English for set up on a LAN. I am unable to establish a connection from Ctrl RRC to Radio RRC. I can access both from my computer on the LAN but nothing seems to happen when I press the power on button. (step 12 on page 11 of the User Manual)
I am starting to feel very frustrated after playing with this for 4 weeks and have only 2 weeks before I leave on my next trip. If possible I would love to talk with someone via phone (My dime) to see if I can figure out what I am missing.
Thank you ...Bob Wold K6ZLY k6zly.bob....at....gmail .... dot ... com
-
Hi you do not say which radio you use ? If nothing happens it's probaly not the LAN settings which is wrong. it's cables, radio mode or baud rate. If the RRC understand that you want to connect and the network/connection settings are wrong the you will get an error tone in the speaker. Don't forget to look at the status pages also. The most common error when setting up on LAN is that the user have forgot to change the default SIP contact to the current IP number of the radio RRC.
73 de mike
-
Thank you for the input. Radio is TS 470. I'll check the cables, mode and baud rate again ..............Bob
-
Oh boy ........ the coffee has not kicked in yet .... radio is a Kenwood TS-480 :-)
-
Thanks for the help .... many off forum responses.
Problem was that the baud rate was not correct for the TS-480.
Now on to the next level of set up experiments :-)
-
see my web page how I have setup my 480. Maybe you find it useful...
http://www.qsl.net/sv1dpi/en/articles/remoterig.html