Remote Rig
RRC 1258 Support in English => Configuration, RRC 1258 => Topic started by: n2tta on 2014-08-24, 20:23:27
-
N1MM did not read frequency, CW work good.
What configuration i was missing?
yuri
-
ohh, looks like no activity here....
still don't have CAT data on remote side
Any idea what i have to do?
-
You need to connect a RS-232 / TTL converter to Radio-RRC COM2 like ICOM CT-17, Pirats which have no external power input will not work, they need to have a MAX-232 or similiar inside.
Then connect the PC- to Control-RRC com2 and set it to mode 2 and the serial settings that match the CI-V settings in the radio
73 de mike