Remote Rig

RRC 1258 Support in English => Configuration, RRC 1258 => Topic started by: k4gjf on 2014-09-01, 23:42:16

Title: RRC-1258 LAN Connection
Post by: k4gjf on 2014-09-01, 23:42:16

I have both the control and radio configured.
When I try to connect I get the beep tone from the control unit.
The SIP contact in the control is set to 192.168.1.228 in radio settings
I can connect to both units using web-interface.
I must be overlooking something simple.

PC:            IP                192.168.1.119
                 GATEWAY    192.168.1.1
       
CONTROL:  IP               192.168.1.227
                  GATEWAY   192.168.1.1
                  DNS           192.168.1.1

RADIO     :  IP               192.168.1.228
                  GATEWAY   192.168.1.1
                  DNS           192.168.1.1

All netmasks are the same. 255.255.255.0
 

Title: Re: RRC-1258 LAN Connection
Post by: dj0qn on 2014-09-01, 23:49:00

Drop me a short e-mail at dj0qn (at) darc.de and I will send you my networking checklist. This will
walk you through the process of getting this working.

73,
Mitch DJ0QN / K7DX

Title: Re: RRC-1258 LAN Connection
Post by: k4gjf on 2014-09-04, 15:26:09

IP addresses 227 and 228 were changed to 126 and 127.  All is working fine now.

Title: Re: RRC-1258 LAN Connection
Post by: Fred VE3PIE on 2014-09-05, 02:01:29

I am having problems also.
does someone have Mitch's checklist ?
I used to have it, but seems to have disappeared
Fred VE3PIE

Title: Re: RRC-1258 LAN Connection
Post by: dj0qn on 2014-09-05, 07:35:15

Good morning, Fred. I will resend it to you now by mail.

73,
Mitch DJ0QN / K7DX