Remote Rig

RRC 1258 Support in English => Configuration, RRC 1258 => Topic started by: alex4alex on 2014-09-02, 00:16:01

Title: IC-7100 with HRD, or DXLabs
Post by: alex4alex on 2014-09-02, 00:16:01

I have successfully set up the radio and control for the IC-7100 and can operate remotely.  I have not been able to get my DXlabs Commander (CAT Control) to work from the control side remotely, it will work at the radio side.  I was hoping to do this with only the USB cables at each end.  Is that possible or do I need to run another cable from the radio box to one of the com ports on the radio RRC-1258?

Title: Re: IC-7100 with HRD, or DXLabs
Post by: dj0qn on 2014-09-02, 00:18:42

See the following thread:
http://www.remoterig.com/forum/index.php?topic=2818.msg12774#msg12774

73,
Mitch DJ0QN / K7DX