Remote Rig

RRC-Nano => General => Topic started by: hb9edm on 2014-09-27, 17:44:43

Title: Frequency refresh
Post by: hb9edm on 2014-09-27, 17:44:43

Hello remoterig guys!
With this application you have made ​​a big step forward in the remoterig suite!

You have managed to do better than what I had thought with this post:

http://www.remoterig.com/forum/index.php?topic=2402.0

Congratulations and thanks for the good work!!!
THKS THKS

______________________________________________________________________________


Now we come to the problems :-)

With the app I can connect without problems to the radio but when I change the "BAND" on the display the frequency don't change.

I'm sure the radio band changes . In addition, it also changes the " MODE" 40m-lsb, 20m-usb, .....and this appears on the phone display .

Where I'm wrong?

All the test are done in a LAN with RRC connected via cable and obviously the phone via wifi.



For the moment is everything!
I'm waiting further developments!   :-)

73 best
HB9EDMarco

Title: Re: Frequency refresh
Post by: hb9edm on 2014-10-03, 16:31:36

No one has identified this problem?

I tried to change the baud rate of the com2 , I tried to change other connection parameters but no change.

The Android app does NOT change frequency.

thks!
HB9EDM

Title: Re: Frequency refresh
Post by: dl2nd on 2014-10-30, 22:22:01

Hi Marco,

I have exactly the same Problem.
I am using a Samsung Galaxy Note 3 and Android 4.4.2.

73,
Uwe

Title: Re: Frequency refresh
Post by: roland on 2014-10-31, 20:21:30

Hi guys.

First of all, sorry I haven't given any response before now.
I have been assigned into other things and missed this.

We will look into to this. In case you want me to check your RRC answers
here from Microbit you can send me the address/user/password in a PM.