Remote Rig
RRC 1258 Support in English => Configuration, RRC 1258 => Topic started by: N6TR on 2014-11-13, 06:49:11
-
Have an older styles remote rig box with serial port. Trying to talk to it using a USB to serial port adapter - and Microbit Setup Manager (version 1.27).
I can see COM6 in my Device Manager and can even talk to it using a terminal emulator program (connecting pins 2 to 3 and looping back). However, I can never get COM6 to show up as an option in the Microbit program. I only see COM2, COM3 and COM4. If I change the port from COM6 to COM2 - then I see COM3, COM4 and COM5 in the Microbit program.
Any help appreciated.
Tree N6TR
-
When you say
I can never get COM6 to show up as an option in the Microbit program
do you by that mean that it isn't an option on the "Serial Port" tab in the Setup Manager? If that is the case then maybe you are mixing up the different types of virtual serial ports there are? There are two types, one is the USB ports which are created when the RRC is connected to a PC via USB and the other is a software only port which is created on the "Serial Port" tab in the Setup Manager program. When creating the software only port Setup Manager lists the first 3 free serial ports it finds for you to select from.
-
I think the page I was looking at was for some other purpose. I played around enough to get the manual page to come up (using SecureCRT to talk to COM6). I never did get the microbit program to talk to the box. :-(
-
Could you please clarify which program you are referring to as "Microbit program"?
-
I have a similar problem - on a Windows 7 laptop, the Microbit setup manager can no longer see the RRC. I can manage the RRC over the web interface, and on a separate Windows 7 PC (where I did *not* install the Microbit virtual ports, just the Setup Manager, the setup utility *can* see the RRC and communicate.
On the laptop, I uninstalled/reinstalled the setup Utility, still can not see or communicate with the RRC.
John K3TN
-
I have a similar problem - on a Windows 7 laptop, the Microbit setup manager can no longer see the RRC. I can manage the RRC over the web interface, and on a separate Windows 7 PC (where I did *not* install the Microbit virtual ports, just the Setup Manager, the setup utility *can* see the RRC and communicate.
On the laptop, I uninstalled/reinstalled the setup Utility, still can not see or communicate with the RRC.
John K3TN
If you take a look at "Human Interface Devices" in Device Manager when connecting the RRC, will you then see one or more devices being added to the list?