Remote Rig

RRC-Nano => General => Topic started by: LA7THA on 2014-12-06, 09:05:14

Title: Nano on RRC Version 1
Post by: LA7THA on 2014-12-06, 09:05:14

Hi All,

I installed Nano on my Samsung S3 mobile phone. Seems I get the Sip working at least that is what RRC Radio main page is reporting. My system is working with RRC micro using PC and TRX-Manager via CAT. Cold this problem be relate to Version 1 of RRC since I can’t connect to COM2

73 Rune LA7THA

Title: Re: Nano on RRC Version 1
Post by: roland on 2014-12-08, 08:17:12

Are you using the Kenwood or the Elecraft app?
In any case both should work if you have you radio on COM2.
Are your port values correct?

Title: Re: Nano on RRC Version 1
Post by: LA7THA on 2014-12-12, 07:57:04

Hi

I am using Version1 of the RRC (Silver type housing) I guess they have com0 ("display com port") and com1 serial port where my TS480 is connected. If i understand this correct its version2 of RRC  that have com0, com1, com2 ???. The ports are the  same as in my control RRC when i am using my Kenwood TS 480 front panel. 

73 Rune LA7THA

Title: Re: Nano on RRC Version 1
Post by: roland on 2014-12-12, 08:27:54

RRC-Nano does not work with RRC Version 1.

Title: Re: Nano on RRC Version 1
Post by: LA7THA on 2014-12-14, 13:50:46

Thanks

73 Rune LA7THA