Remote Rig

RRC 1258 Support in English => General discussion forum => Topic started by: w1imd on 2014-12-11, 16:07:43

Title: RRC Micro program loading error
Post by: w1imd on 2014-12-11, 16:07:43

I am trying to set up the RRC Micro client on my Win XP 32 bit laptop. I unzipped the download and ran the setup program with no issues. When I start the client I get an error message which I have attached  as a jpeg file.

Any help would be greatly appreciated!

Paul

Title: Re: RRC Micro program loading error
Post by: roland on 2014-12-11, 20:55:13

Windows XP is not longer supported by Microsoft and I would recommend an update to a newer version.
However running RR Micro should work on XP 32, so we have to check this up on a virtual machine here.

Did any previous version work in that Laptop?

Title: Re: RRC Micro program loading error
Post by: w1imd on 2014-12-11, 21:06:11

This is my first attempt at using this software.

Title: Re: RRC Micro program loading error
Post by: roland on 2014-12-11, 21:08:27

Okay. I have to admit that the later versions have not been tested against XP as its not supported by Microsoft anymore.
So I have to set up a test tomorrow at work to ensure that things are still OK with XP.

Title: Re: RRC Micro program loading error
Post by: w1imd on 2014-12-11, 21:13:02

Thank you Roland. I appreciate the quick response and your help.

Title: Re: RRC Micro program loading error
Post by: roland on 2014-12-12, 14:31:48

Hi. I have now tested with a WinXP 32bit installation here and can confirm the problem on XP.
I will investigate what can be done
 

Title: Re: RRC Micro program loading error
Post by: roland on 2014-12-12, 15:37:21

A bit later. Think I found the error for XP.
Please test this install RRCMicro-1.6.14 (http://www.remoterig.com/firmwares/RRCMicro_1.6.14.zip)
and tell me the result

Title: Re: RRC Micro program loading error
Post by: w1imd on 2014-12-13, 16:13:43

That did fix the error, I now have RRC Micro running on my laptop.

Please describe what the Buffer indicator means. On my laptop it is about 7/8 full of red bars.

Thank you!

Title: Re: RRC Micro program loading error
Post by: roland on 2014-12-13, 16:20:09

Hi. Thanks :)

You can read about the Buffer indicator here
Setup/Indicator Bar (http://www.remoterig.com/wp/?page_id=93)