Remote Rig
RRC-Nano => General => Topic started by: dl2nd on 2015-01-05, 12:49:54
-
Hello,
I am using a Galaxy Note 3 with Android 4.4.2, the RRC-1258 Firmware Version is 2.83.
My radio is a Kenwood TS-2000.
When the connection is established and I enter the frequency, for example 14305 Mc or a higher Band, the “Mode” changes to LSB.
It is impossible to change to USB with the “Mode” button, only AM and LSB are possible.
On 40m Band it works ok and the “Mode” changes to LSB.
When I switch the Band with “Band”, the Mode is already selected.
Another problem. The frequency is not displayed in both cases.
Regards,
Uwe
-
Hello Uwe,
Using a Kenwood TS-480 I do not see such strange behavior. It is possible for us to get access to your radio-RRC so we can have a look from here? If so, then email/PM me the details.
Jan
-
The Problem has been already solved since Version 1.0.8, thank you Jan.
Uwe
-
The Problem has been already solved since Version 1.0.8, thank you Jan.
Uwe
:D