Remote Rig
RRC 1258 Support in English => Hardware, Cabling, Installations => Topic started by: DM1CG on 2015-02-25, 11:16:50
-
Hy
Is there a way to get an 5 GHz - 8021.11a WiFi Modul running iunside the RRC ?
best 73 de Carsten
DM1CG
-
can the 2,4 Ghz switch between
WPA2 TKIP and WPA2 AES // WPA1 TKIP and WPA1 AES
?
-
There is no 5 GHz support in thr WiFi Module
here is a link to the data sheet
http://www.redpinesignals.com/pdfs/datasheets/RS9110-N-11-24_DataSheet.pdf (http://www.redpinesignals.com/pdfs/datasheets/RS9110-N-11-24_DataSheet.pdf)
/mike
-
Hello Mike
thanks for that .
Modul make WPA2-TKIP only !
WPA2-TKIP is erased from the 802.11 standart ... only WPA2-AES is now the "best".
Then I can stop searching the solution for the problems, I had in the last "hospots" using onyl WPA2-AES.
vy 73 de Carsten
-
Be careful Carsten, the internal WLAN card only can not connect to open "hotspots", since there is no
way to give a password into a web page from a Radius Server. It only works in networks that use no
extra authentication beyond encryption.You would need an external bridge if you need that type of support.
73,
Mitch DJ0QN / K7DX
-
Hy Mitch
If the access is limitated to one MAC each voucher - then we have an other problem.
I get all the time a voucher from up to 3 or 5 MACīs.
My problem is that I was not able to connect an close "hotspot" with WPA2-AES !
Now I know why th solution -> stop searching !
If only WWLAN is PA2-AES I use my free with other thinks.
vy 73 de Carsten