Remote Rig
RRC 1258 Support in English => Hardware, Cabling, Installations => Topic started by: K3TN on 2015-03-11, 12:29:01
-
Setup: K3/Mini to K3 through Remote Rig, running N1MM+ and Classic - all works FB in CW with Winkey etc.
For last weekend's ARRL DX SSB contest, we wanted to use the N1MM+ wav files - hit F1, recorded voice says "CQ TEST" etc. In order for that to work, need to pass PTT from the PC to the remote K3.
N1RM rigged up a xistor switch from a serial port to close PTT on the control side K3, which worked fine. I'm thinking there should be a way to pass N1MM PTT thru the RRCs to the radio side K3 and do PTT there without having to add hardware and tie up a serial port on the Control side.
I'm guessing it has something thing to do with I/O settings - USB RTS as PTT on the Control side? and/or the OUT modes on the Radio RRC?
Is there a recommended/standard way to do this?
73 John K3TN